Microcontrollers
OMRAM product line is the solution for your embedded design needs. From cost-competitive analog and memory devices to high-performance microcontrollers (MCUs) and Digital Signal Controllers (DSCs), our devices provide a custom fit in your cost-sensitive design. In today’s highly competitive market conditions, OMRAM goal is to provide the best devices, value and support to reduce your risk and streamline your time to market.
Sub Categories :
- 8 Bit Microcontrollers
- 16 Bit Microcontrollers
- 32 Bit Microcontrollers
- ARM Based Microcontrollers
Integrated Circuits (ICs)
An integrated circuit is a set of electronic circuits in a single chip incorporated together to perform a specific function.
Integrated circuit (IC) sometimes called a chip or microchip. It is a wafer of semiconductor material (usually silicon) on which multiple transistors, capacitors and resistors are fabricated.
Sub Categories :
- Memory ICs
- Logic ICs
- Interface ICs
- Power Management ICs
- Data Converter ICs
Discrete Semiconductors
Devices designed to perform basic electronic functions.
Discrete semiconductors perform basic functions in electronic circuits, such as rectification (diodes), amplification (transistors) and switching (transistors and thyristors). They typically have two or three terminals.
Sub Categories :
- Diodes
- Transistors
- Thyristors
- Mosfet
Passive Components
Components that are capable of affecting the flow of an electrical current, but don’t generate, amplify or control it.
The passive component provides attenuation of an electrical signal instead of generation or amplification. It consumes energy but doesn’t produce or control it. Resistors, capacitors, inductors and transformers are the main passive components used in electronics.
Sub Categories :
- Capacitors
- Crystals
- Oscillators
- Inductors
- Resistors
- Transformers
Electromechanical
Components used to convert electric power to mechanical action and vice versa.
An electromechanical component is one that uses an electrical power or signal to cause some kind of mechanical changes, such as a motor turning. These usually use an electrical current to create a magnetic field which causes a physical movement. Mechanical components can also generate a signal, as in the case of a microphone.
Sub Categories :
- Relays
- Switches
- Heat Sinks
- Fans and Blowers
Connectors
Connectors are present in almost all electrical applications, they are used in power, telecommunications, audio, video, computing, embedded systems, automation, transportation, ATE systems and lightning applications just to name a few. Connections may be permanent or removable. In every coupling there is generally a "female" (socket, receptacle) and a "male" (plug) that mate together. In their internal construction connectors are formed by contacts or terminals and a dielectric which are held together by the connector’s package or case.
Sub Categories:
- Board Connectors
- Circular Connectors
- Terminals & Terminal Blocks
- RF/Coaxial Connectors
Circuit Protection
Devices that are used to protect electrical circuits from damage.
The circuit protection device is an electrical device used for preventing an unnecessary amount of current. Circuit protection device can become damaged to save other components of the electrical circuit. Circuit protection devices can be either semiconductor (like TVS diodes, circuit protection ICs, etc.) or non-semiconductor (like fuses, PTC Resettable Fuses, gas discharge tubes, etc.)
Sub Categories:
- Circuit Breakers
- Fuses and Fuse Holders
- PTC Resettable Fuses
- Varistors
Sensors
Devices used for detecting and measuring of some type of input from physical environment and converting the information into electrical signals.
Sensors are devices used for detecting of some input from physical environment and converting the information into electrical signals. The input could be pressure, temperature, moisture, flow, level, acceleration or any other environmental phenomena. The output is an electric signal usually. It can be analog, digital or some specific output signal.
Sub Categories:
- Current Sensors
- Magnetic Sensors
- Motion Sensors
- Optical Sensors
Optoelectronics
Electronic devices that are used to emit, detect or control light.
Optoelectronic components are designed to transform light into an electrical signal or to transform an electrical signal into light. Examples of these types of components are optocouplers, LEDs and displays.
Sub Categories:
- Displays
- Fiber Optics
- LEDs
- Optocouplers
PCB (Printed Circuit Board)
Bare PCB or empty PCB, is an electronic board laminated in layers made from epoxy fiberglass, copper foil, and PCB inks. A blank printed circuit board has a substrate sheet, copper traces, non-conductive prepreg or polymer layers between the copper traces, and solder masks . A bare board PCB refers to a printed circuit board that is devoid of through-holes or electronic components. Empty as it usually is, it is regarded as the skeleton of the conventional PCB, before it becomes modified with through holes or electronic components.
Sub Categories:
- Single-Sided PCBs
- Double-Sided PCBs
- Multilayer PCBs
- Rigid PCBs
- Flex PCBs
USB Cable
USB stands for "Universal Serial Bus". USB is a mechanism used to connect computer to peripheral devices such as cameras, camcorders, printers, scanners, and more. Before the advent of USB technology, a PC typically included one or two serial connections, a parallel port, keyboard and mouse connectors, and in some instances, a joystick port.
Sub Categories:
- USB Type A
- USB Type B
- USB Type C
- USB 2.0
- USB 3.0